| Model | STR82D | SmartLine Pressure Transmitter with Remote Diaphragm Seals |
| Number of Seals | 2 | 2 Remote Seals |
| Primary Fill Fluid (Meter body) | 1 | Silicone Oil 200 |
| Dual Head DP | C | 316 SS (bolt-on heads) |
| Bolts and Nuts for Transmitter Heads | C | Carbon Steel Bolts and Nuts |
| Secondary Fill Fluid (capillary & seal)** | 3 | Silicone Oil 704 |
| Connection of Remote Seal to Meter Body** | C | Capillary Length: 15 feet (4.5 m), SS Armor |
| Seal Option** | 0 | None |
| Flush Flanged Seal with Lower** | DDA | Diaphragm Diameter: 4.1"
Flange Size: 2"
Flange Pressure Rating(1): ANSI 150 |
| Wetted Material | BA | Diaphragm: 316L SS
Upper Insert: 316L SS |
| Non-Wetted Material (upper, upper insert) | 4 | Upper: 316L SS
Upper Insert: 316L SS |
| Bolts(2) | 0 | No Selection |
| Flushing Connections and Plugs(3) | 0 | None |
| Gasket | K | Klinger® C-4401 (non-asbestos) |
| Approvals | A | FM Explosion proof, Intrinsically Safe, Non-incendive, & Dustproof |
| Electronic Housing Material & Connection Type | A | Material: Polyester Powder Coated Aluminum
Connection: 1/2 NPT
Lightning Protection: None |
| Output/ Protocol | H | Analog Output: 4-20mA dc
Digital Protocol: HART Protocol |
| Customer Interface Selections | S |
|
| Application Software | 1 | Standard Diagnostics |
| Output Limit, Failsafe & Write Protect Settings | 1 | Write Protect: Disabled
Fail Mode: High> 21.0mAdc
High & Low Output Limits(4): Honeywell Std (3.8 - 20.8 mAdc) |
| General Configuration | S | Factory Standard |
| Accuracy and Calibration | A | Accuracy: Standard
Calibrated Range: Factory Std
Calibration Qty: Single Calibration |
| Mounting Bracket | 1 | Bracket Type: Angle Bracket
Material: Carbon Steel |
| Customer Tag | 0 | No customer tag |
| Unassembled Conduit Plugs & Adapters | A0 | No Conduit Plugs or Adapters Required |
Your cart is empty
