Part Number: STG770-E1GC2A-1-0-BHB-11S-A-01A0-00-0000Model: STG770 Gauge Dual Head Pressure Transmitter
Brand: Honeywell
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months
Ordering Information
| Model | STG770 | Gauge Dual Head Pressure Transmitter |
| Process Wetted Heads & Diaphragm Materials | E | Process Head Material:316 Stainless Steel
Diaphragm Material: 316L SS |
| Fill Fluid | 1 | Silicone Oil 200 |
| Process Connection | G | Size/Type: 1/2" NPT (female)
Material: Same as Process Head(1) |
| Bolt/Nuts Materials | C | Carbon Steel |
| Vent/Drain Type/Location | 2 | Head Type: Single Ended
Vent Type: Standard Vent
Location: Side
Vent Material: Matches Head Material(2) |
| Gasket Materials | A | Teflon® or PTFE (Glass Filled) |
| Head/Connect Orientation | 1 | Standard
High Side Left, Low Side Right(3) / Std Head Orientation |
| Approvals | 0 | No Approvals Required |
| Electronic Housing Material & Connection Type | B | Material: Polyster Powder Coated Aluminum
Connection: M20
Lighting Protection: None |
| Output/ Protocol | H | Analog Output: 4-20mA dc
Digital Protocol: HART Protocol
|
| Customer Interface Selections | B | Indicator: Basic
Ext Zero, Span & Config Buttons: None
Languages: EN |
| Application Software | 1 | Standard Diagnostics |
| Output Limit, Failsafe & Write Protect Settings | 1 | Write Protect: Disabled
Fail Mode: High> 21.0mAdc
High & Low Output Limits(4): Honeywell Std (3.8 - 20.8 mAdc) |
| General Configuration | S | Factory Standard |
| Accuracy and Calibration | A | Accuracy: Standard
Calibrated Range: Factory Std
Calibration Qty: Single Calibration |
| Mounting Bracket | 0 | Bracket Type: None
Material: None |
| Customer Tag | 1 | One Wired Stainless Steel Tag (Up to 4 lines 26 char/line) |
| Unassembled Conduit Plugs & Adapters | A0 | No Conduit Plugs or Adapters Required |
| Certifications & Warranty | 00
| No additional options |
| Factory | 0000 | Factory Identification |
- STG730,740,770 supplied via 1/2" flange adapter same material as process head except carbon steel shall use 316 SS
- Except Carbon Steel Heads shall use 316SS Vent/Drain & Plugs and or 1/2" adapters
- Left side/Right side as view ed from the customer connection perspective
- NAMUR Output Limits are configurable by customer
- Estimated Lead Time: 4 - 6
- Shipping Weight: 8 Kg
Your cart is empty
