Model |
STD775 |
Differential Pressure Transmitter |
Process
Wetted Heads &
Diaphragm
Materials
|
E |
Process Head Material: 316 Stainless Steel
Diaphragm Material: 316L Stainless Steel |
Fill Fluid |
1 |
Silicone Oil 200 |
Process
Connection |
H |
1/2" NPT female Materials to Match Head & Head Bolt Materials Selections(1) |
Bolt/Nut
Materials |
C |
Carbon Steel |
Vent/Drain
Type/Location |
4 |
Head Type: Dual Ended Vent Type: Standard Vent Location: End Vent Material: Matches Head Material(1) |
Gasket
Material
|
A |
Teflon®
or PTFE (Glass Filled) |
Static
Pressure |
S |
Standard Static Pressure - 4500 psig (315 bar) |
Head/Connect
Orientation
|
1 |
Meter Body & Connection Orientation Standard High Side Left, Low Side Right(2) / Std Head Orientation |
Approvals |
D |
IECEx Explosion proof, Intrinsically Safe & Non-incendive |
Electronic
Housing Material
& Connection
Type
|
B |
Material: Polyester Powder Coated Aluminum Connection: M20 Lightning Protection: None |
Output/
Protocol |
H |
Analog Output: 4-20mA dc Digital Protocol: HART Protocol |
Customer
Interface
Selections |
S |
Indicator: Standard (w/Internal
Zero,Span & Config
Buttons) Ext Zero, Span & Config Buttons: None Languages: EN, RU
|
Application
Software |
1 |
Standard Diagnostics |
Output Limit,
Failsafe & Write
Protect Settings
|
1 |
Write Protect: Disabled Fail Mode: High> 21.0mAdc High & Low Output Limits(3): Honeywell Std (3.8 - 20.8 mAdc) |
General
Configuration |
S |
Factory Standard |
Accuracy and
Calibration |
A |
Accuracy: Standard Calibrated Range: Factory Std Calibration Qty: Single Calibration |
Mounting
Bracket
|
7 |
Bracket Type: Flat Bracket Material: 316 SS |
Customer
Tag
|
0 |
No customer tag |
Unassembled
Conduit
Plugs &
Adapters |
A0 |
No Conduit Plugs or Adapters Required |
Certifications &
Warranty
|
F1 |
Calibration Test Report & Certificate of Conformance |