Part Number: STD725-E1AC2AS-1-0-AHT-11S-A-50A0-00-0000Model: STD725 SmartLine Differential Pressure Transmitter
Brand: Honeywell
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months
Features
- Accuracies up to 0.05% of span
- Stability up to 0.020% of URL per year for 10 years
- Automatic static pressure & temperature compensation
- Rangeability up to 100:1
- Response times as fast as 100ms
- Easy to use and intuitive display capabilities
- Intuitive External Zero, Span and configuration capability
- Comprehensive on-board diagnostic capabilities
- Integral Dual Seal design for highest safety based on ANSI/NFPA 70-202 and ANSI/ISA 12.27.0
- World class overpressure protection
- Full compliance to SIL 2/3 requirements.
- Modular design characteristics
Ordering Information
| Model | STD725 | Differential Pressure Transmitter |
| Process Wetted Heads & Diaphragm Materials | E | Process Head Material:316 Stainless Steel
Diaphragm Material: 316L Stainless Steel |
| Fill Fluid | 1 | Silicone Oil 200 |
| Process Connection | A | None
None (1/4" NPTF female thread Std) |
| Bolt/Nuts Materials | C | Carbon Steel |
| Vent/Drain Type/Location | 2 | Head Type: Dual Ended
Vent Type: Standard Vent
Location: Side
Vent Material: Matches Head Material(1) |
| Gasket Materials | A | Teflon® or PTFE (Glass Filled) |
| Static Pressure | S | Standard Static Pressure - 4500 psig (315 bar) |
| Head/Connect Orientation | 1 | Standard, High Side Left, Low Side Right(2) / Std Head Orientation |
| Approvals | 0 | No Approvals Required
|
| Electronic Housing Material & Connection Type | A | Material: Polyester Powder Coated Aluminum
Connection: 1/2 NPT
Lighting Protection: None |
| Output/Protocol | H | Analog Output: 4-20mA dc
Digital Protocol: HART Protocol |
| Customer Interface Selections | T | Indicator: Standard (w/Internal
Zero,Span & Config
Buttons)
Ext Zero, Span & Config Buttons: Yes
Languages: EN, RU |
| Application Software | 1 | Diagnostics: Standard Diagnostics |
| Output Limit, Failsafe & Write Protect Settings | 1 | Write Protect: Enabled
Fail Mode: High> 21.0mAdc
High & Low Output Limits(3) |
| General Configuration | S | Factory Standard |
| Accuracy and Calibration | A | Accuracy: Standard
Calibrated Range: Factory Std
Calibration Qty: Single Calibration |
| Mounting Bracket | 5 | Bracket Type: Flat Bracket
Material: Carbon Steel |
| Customer Tag | 0 | No customer tag |
| Unassembled Conduit Plugs & Adapters | A0 | No Conduit Plugs or Adapters Required |
| Certifications &
Warranty
| 00 | None - No additional options
|
| Factory | 0000 | Factory Identification |
- Except Carbon Steel Heads shall use 316SS Vent/Drain, Plugs & Adapters when required
- Left side/Right side as viewed from the customer connection perspective
- NAMUR Output Limits 3.8 - 20.5mAdc can be configured by the customer or select custom configuration Table Vc
- Estimated Lead Time: 12 - 16
- Shipping Weight: 10 Kg
- Made in China
Your cart is empty
