SHT75 Pin Type Temperature And Humidity Sensor Chip Soldered

Product Description
SHT75 Pin Type Temperature And Humidity Sensor Chip



The sht7x can be soldered using standard wave soldering. 20 seconds at a maximum temperature of 235°C. If manual soldering is used, the contact time should not exceed 5
seconds, the maximum temperature is 350°C. Note: After wave soldering, store the sensor at >75%rh for at least 12 hours to ensure that the polymer
of rehydration. Failure to do so will result in drift in sensor readings. The sensor can also be placed in a natural environment (humidity>40%rh) for more than 5 days
to rehydrate. In either case, whether manual soldering or reflow soldering, it is not permissible to rinse the board after soldering.



Datasheet:

Model SHT75
Type Humidity
Material Mixture
Physical properties of the material Semiconductor
Output signal Digital
Sensitivity ±1%