Your cart is empty

New Products - more

0532656 New Hengstler

$567.00 $337.00
Save: 41% off

0532655 New Hengstler

$473.00 $281.00
Save: 41% off

0532654 New Hengstler

$511.00 $304.00
Save: 41% off

Reviews - more

Write a review on this product.

Information

Home :: Rosemount Transmitter :: EJA110E-JMS4G-912EB/FF1/D4/X2/A/HE New Yokogawa EJA110E Differential Pressure Transmitter

Product 662/1465

Return to the Product List

EJA110E-JMS4G-912EB/FF1/D4/X2/A/HE New Yokogawa EJA110E Differential Pressure Transmitter

$2,147.00 $1,052.00
Save: 51% off

Part Number: EJA110E-JMS4G-912EB/FF1/D4/X2/A/HE

Model: EJA110E Differential Pressure Transmitter

Manufacturer: Yokogawa

Condition: New & Original in Factory Packing

Factory Warranty: 12 Months

EJA110E features include:

0.055% Accuracy (0.04% Accuracy optional)
0.1% Stability per 10 years
90 ms Response Time
Exida and TUV SIL 2 / SIL3 Certified
MWP 2,300 psi (MWP 3,600 psi option)
Local Parameter Setting (LPS)

Ordering Information

Model	EJA110E	Differential pressure transmitter
Output signal	-J	4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)⁽¹⁾
Measurement span (capsule)	M	1 to 100 kPa (4 to 400 inH2O)
Wetted parts material⁽²⁾	S^#	Cover flange and process connector: ASTM CF-8M⁽³⁾Capsule: Hastelloy C-276⁽⁴⁾ (Diaphragm), F316L SST, 316L SST (Others) Capsule gasket: Teflon-coated 316L SST Vent/Drain plug: 316 SST
Process connections	4	with 1/2 NPT female process connector
Bolts and nuts material	G	316L SST
Installation	-9	Horizontal piping and left side high pressure
Amplifier housing	1	Cast aluminum alloy
Electrical connection	2	1/2 NPT female, two electrical connections without blind plugs
Integral indicator	E	Digital indicator with the range setting switch (push button)⁽⁵⁾
Mounting bracket	B	304 SST 2-inch pipe mounting, flat type (for horizontal piping)
Factory Mutual (FM)	/FF1	FM Explosionproof Approval⁽⁶⁾ Applicable Standard: FM3600, FM3615, FM3810, ANSI/NEMA 250 Explosionproof for Class I, Division 1, Groups B, C and D, Dust-ignitionproof for Class II/III, Division 1, Groups E, F and G, in Hazardous locations, indoors and outdoors (Enclosure: Type 4X) ??FACTORY SEALED, CONDUIT SEAL NOT REQUIRED.?? Temperature class: T6, Amb. Temp.: ?C40 to 60??C (?C40 to 140??F)
Calibration units⁽⁷⁾	/D4	M calibration (kgf/cm2 unit)
Painting - Coating change	/X2	Anti-corrosion coating⁽⁸⁾⁽⁹⁾
Lightning protector	/A	Transmitter power supply voltage: 10.5 to 32 V DC (10.5 to 30 V DC for intrinsically safe type.) Allowable current: Max. 6000 A (1??40 ??s), Repeating 1000 A (1??40 ??s) 100 times Applicable Standards: IEC 61000-4-4, IEC 61000-4-5
Fluoro-rubber O-ring	/HE	All O-rings of amplifier housing. Lower limit of ambient temperature: ?C15??C (5??F)

The ??*?? marks indicate the most typical selection for each specification.

HART 5 or HART 7 is selectable. Specify upon ordering.
Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user??s process fluids.
Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150??C [302??F] or above). Contact Yokogawa for detailed information of the wetted parts material.
Cast version of 316 SST. Equivalent to SCS14A.
Hastelloy C-276 or ASTM N10276.
Not applicable for output signal code F.
Applicable for Electrical connection code 2, 4, 7, 9, C and D.
The unit of MWP (Max. working pressure) on the name plate of a housing is the same unit as specified by option codes D1, D3, and D4.
Not applicable for amplifier housing code 2 and 3.
Not applicable with color change option.

Estimated Lead Time: 12 - 16
Shipping Weight: 8 Kg

Add to Cart: