Your cart is empty

$271.00 $133.00
Save: 51% off

$3,843.00 $1,883.00
Save: 51% off

$2,700.00 $1,323.00
Save: 51% off

Home :: Rosemount Transmitter :: EJA110E-JHS4G-91CDJ/KU22/D3 New Yokogawa EJA110E Differential Pressure Transmitter

Product 622/1465

EJA110E-JHS4G-91CDJ/KU22/D3 New Yokogawa EJA110E Differential Pressure Transmitter

$1,800.00 $882.00
Save: 51% off

Part Number: EJA110E-JHS4G-91CDJ/KU22/D3

Model and Suffix Codes

Model: EJA110E - Differential pressure transmitter
Output signal: -J - 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)?
Measurement span (capsule): H - 5 to 500 kPa (20 to 2000 inH2O)
Wetted parts material?:
[Cover flange and process connector] ASTM CF-8M?
[Capsule] Hastelloy C-276⁴ (Diaphragm); F316L SST, 316L SST (Others)
[Capsule gasket] Teflon-coated 316L SST
[Vent/Drain plug] 316 SST
Process connections: 4 - with 1/2 NPT female process connector
Bolts and nuts material: G - 316L SST
Installation: -9 - Horizontal piping and left side high pressure
Amplifier housing: 1 - Cast aluminium alloy
Electrical connection: C - 1/2 NPT female, two electrical connections and a SUS316 blind plug
Integral indicator: D - Digital indicator⁵
Mounting bracket: J - 316 SST 2-inch pipe mounting, flat type (for horizontal piping)
Optional Codes:
/KU22 - ATEX
Combined KF22, KS21 and ATEX Intrinsically safe Ex ic^6,7
[ATEX Intrinsically safe Ex ic]
Applicable Standard: EN 60079-0:2012, EN 60079-11:2012
II 3G Ex ic IIC T4 Gc, Amb. Temp.: 30 to 60?C ( 22 to 140?F)⁸Ui=30 V, Ci=27.6 nF, Li=0 H

NOTE:

The " * " marks indicate the most typical selection for each specification.

HART 5 or HART 7 is selectable. Specify upon ordering.
Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user s process fluids. Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150?C [302?F] or above). Contact Yokogawa for detailed information of the wetted parts material.
Cast version of 316 SST. Equivalent to SCS14A.
Hastelloy C-276 or ASTM N10276.
Not applicable for output signal code G.
Applicable for Electrical connection code 2, 4, 7, 9, C and D.
Lower limit of ambient temperature is 15?C (5?F) when option code HE is specified.
Not applicable for output signal code Q.

Add to Cart: