shoping-cartYour cart is empty
    Sign In or Register



    Sign In Socially

    If you are a member of facebook or google or yahoo, you can login to our system by clicking on the icon below.


EJA110E-JHM5G-91CEJ/D3/M01/T12 New Yokogawa EJA110E Differential Pressure Transmitter

EJA110E-JHM5G-91CEJ/D3/M01/T12 New Yokogawa EJA110E Differential Pressure Transmitter

$1,823.00  $893.00
Save: 51% off


Part Number: EJA110E-JHM5G-91CEJ/D3/M01/T12
Model: EJA110E Differential Pressure Transmitter
Manufacturer: Yokogawa
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months

EJA110E features include:
  • 0.055% Accuracy (0.04% Accuracy optional)
  • 0.1% Stability per 10 years
  • 90 ms Response Time
  • Exida and TUV SIL 2 / SIL3 Certified
  • MWP 2,300 psi (MWP 3,600 psi option)
  • Local Parameter Setting (LPS)

Ordering Information

Model EJA110E Differential pressure transmitter
Output signal -J 4 to 20 mA DC with digital communication (BRAIN protocol)(1)
Measurement span (capsule) H 5 to 500 kPa (20 to 2000 inH2O)
Wetted parts material(2) M# Cover flange and process connector: ASTM CF-8M(3)
Capsule: Monel
Capsule gasket: PTFE Teflon
Vent/Drain plug: 316 SST
Process connections 5 without process connector (1/4 NPT female on the cover flanges)
Bolts and nuts material G 316L SST
Installation -9 Horizontal piping and left side high pressure
Amplifier housing 1 Cast aluminum alloy
Electrical connection C 1/2 NPT female, two electrical connections and a SUS316 blind plug
Integral indicator E Digital indicator with the range setting switch (push button)(4)
Mounting bracket J 316 SST 2-inch pipe mounting, flat type (for horizontal piping)
Calibration units(5) /D3 bar calibration (bar unit)
Material certificate(6) /M01 Cover flange(7)
Pressure test/ Leak test certificate(8) /T12 Test Pressure: 16 MPa(2300 psi)

Nitrogen(N2) Gas(9)
Retention time: one minute

The ??*?? marks indicate the most typical selection for each specification.
  1. HART 5 or HART 7 is selectable. Specify upon ordering.
  2. Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user??s process fluids.
    Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150??C [302??F] or above). Contact Yokogawa for detailed information of the wetted parts material.
  3. Cast version of 316 SST. Equivalent to SCS14A.
  4. Not applicable for output signal code F.
  5. The unit of MWP (Max. working pressure) on the name plate of a housing is the same unit as specified by option codes D1, D3, and D4.
  6. Material traceability certification, per EN 10204 3.1B.
  7. Applicable for process connections codes 0 and 5.
  8. The unit on the certificate is always Pa unit regardless of selection of option code D1, D3 or D4.
  9. Pure nitrogen gas is used for oil-prohibited use (option codes K1, K2, K5, and K6).


  • Estimated Lead Time: 12 - 16
  • Shipping Weight: 8 Kg

Add to Cart:

  • Model: EJA110E-JHM5G-91CEJ/D3/M01/T12
  • 7 Units in Stock


Processing Time
  • Ships in 24 hours: Processing Time is guaranteed to be shorter than 24 hours.
  • Typical Processing Time: 3 - 12 days

We ship to over 200 countries worldwide!