7OX-V O2 Sensor Replacement 100Ω Casing Material ABS 34g Load Resistor

Product Description
7OX-V Gas Oxygen Sensor 34g Load Resistor 100Ω Casing Materia ABS



The data provided in this document are valid at 20°C, 50% RH and 1013 mBar for 3 months from the date
of sensor manufacture. Output signal can drift below the lower limit over time. For guidance on the safe
use of the sensor and on sensor performance outside of these environmental limits, please refer to the
Operating Principles.



ENVIRONMENTAL

Operating Temperature Range -20°C to +50°C
Recommended Storage Temp 0°C to 20°C
Temperature Coefficient 0.2% signal / °C
Absolute Pressure Range Atmospheric ± 10%
Differential Pressure Range 40 mBar maximum
Pressure Coefficient <0.02% signal / mBar
Relative Humidity Range Intermittent:0 to 99%RH non-condensing
Continuous:15 to 99%RH non-condensing


IMPORTANT NOTES
Do not remove label. Do not solder to pins. When installing the sensor into instrumentation,the sensor vent hole should not be blocked.
The instrument should also be adequately vented. If the sensor vent hole is blocked or if the instrument is not adequately vented, sensor performance will be compromised.
For further details, refer to Operating Principles OP02.



LIFETIME

Long Term Output Drif <5% signal / year
Expected Operating Life 2 years in air
Storage Life 6 months in original packaging