4HSC Electrochemical Hydrogen Sulfide (H2S) Gas Sensor

Product Description:

4HSC Electrochemical Hydrogen Sulfide (H2S) Gas Sensor



Features:

CiTiceLs are designed for operation in a wide range of environments and harsh conditions. However, it is

important that exposure to high concentrations of solvent vapours is avoided, both during storage, fitting into

instruments, and operation.

When using sensors with printed circuit boards (PCBs), degreasing agents should be used before the sensor is

fitted. Do not glue directly on or near the CiTiceL as the solvent may cause crazing of the plastic.



Cross Sensitivity Table

Whilst CiTiceLs are designed to be highly specific to the gas they are intended to measure, they will still respond

to some degree to various other gases. The table below is not exclusive and other gases not included in the table

may still cause a sensor to react.

IMPORTANT NOTE : The cross sensitivity data shown below does not form part of the

product specification and is supplied for guidance only. Values quoted are based on

tests conducted on a small number of sensors and any batch may show significant

variation. For the most accurate measurements, an instrument should be calibrated

using the gas under investigation.



Specifications:

Recommended Load Resistor 5 Ω
Bias Voltage Not required
Housing Material Noryl 110
Weight 5 g (approx.)
Orientation Any