Part Number: 3301HA2S1V3AM0085AANAP1C1Q4Model: 3301 Guided Wave Radar Level Transmitter
Manufacturer: Rosemount
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months
Ordering Information
| Base Model |
3301 |
Guided Wave Radar Level Transmitter (interface available for fully submerged probe) |
| Signal output |
H |
4-20 mA with HART communication |
| Housing material |
A |
Polyurethane-covered Aluminum |
| Conduit / cable threads |
2 |
M20 x 1.5 adapter |
| Operating temperature and pressure(1) |
S |
- 15 psig (-1bar) to 580 psig (40 bar) @ 302 ??F (150 ??C) |
Material of construction(2):
Process connection / probe |
1 |
316L SST (EN 1.4404) |
| Sealing, o-ring material (consult factory for other o-ring materials) |
V |
Viton® Fluoroelastomer |
| Probe type, model 3301 |
3A |
Coaxial (for level measurement)
Process connection: Flange / 1-in., 1?-in.,
2-in. Thread
Probe lengths: Min.: 1 ft. 4 in. (0.4 m)
Max: 19 ft. 8 in. (6 m) |
| Probe length units |
M |
Metric (meters, centimeters) |
| Total probe length(3)(m) |
00 |
0 m |
| Toal probe length(3)(cm) |
85 |
85 cm |
Process connection - size / type (consult factory for other process connections)
ASME / ANSI flanges(4)(5) |
AA |
2 in., 150 lb |
| Hazardous locations certifications |
NA |
No Hazardous Locations Certifications |
| Hydrostatic testing |
P1 |
Hydrostatic testing(6) |
| Cx - special configuration (software) |
C1 |
Factory configuration (Configuration Data Sheet required with order, available at www.rosemount.com) |
| Qx - special certs |
Q4 |
Calibration Data Certification |
- Process seal rating. Final rating depends on flange and O-ring selection.
- For other materials, consult the factory.
- Probe weight included if applicable. Give the total probe length in feet and inches or meters and centimeters, depending on selected probe length unit.
If tank height is unknown, please round up to an even length when ordering. Probes can be cut to exact length in field. Maximum allowable length is determined
by process conditions.
- Available in material 316L and EN 1.4404. For other materials consult the factory.
- ASME/ANSI: Raised face type for SST flanges. EN: Type A flat face for SST flanges. JIS: Raised face type for SST flanges.
- Available for flanged connection.
- Estimated Lead Time: 12 - 16
- Shipping Weight: 20 Kg
Your cart is empty
