1756-OW16I/A New Allen Bradley Contact Output Module

$503.00 $299.00
Save: 41% off

Part Number: 1756-OW16I/A

Model: Contact Output Module

Manufacturer: Allen Bradley

Condition: New & Original in Factory Packing

Factory Warranty: 12 Months

Technical Specifications

Outputs: 16 N.O. individually isolated
Pilot duty: C300/R150
Operating voltage range:
5...125V DC
10...240V AC
Output voltage range (load dependent):
1 A @ 5 30V DC
0.5 A @ 48V DC
0.22 A @ 125V DC
1.5A @ 120V AC 50/60 Hz
0.75A @ 240V AC 50/60 Hz
Output delay time:
Off to On: 10 ms max
On to Off: 10 ms max
Current draw @ 5.1V: 150 mA
Current draw @ 24V: 150 mA
Total backplane power: 4.4 W
Power dissipation, max: 4.5 W @ 60??C (140??F)
Thermal dissipation: 15.35 BTU/hr
Off-state leakage current per point, max: 1.5 mA per point
On-state voltage drop, max: 400 mV DC @ 1 A
Minimum load current: 10 mA per point
Current per module, max: 8 A @ 60??C (140??F)
Initial contact resistance, max: 100 m @ 6V 1 A
Switching frequency, max: 1 operation/3 s (0.3 Hz at rated load)
Bounce time, mean: 1.2 ms
Expected contact life:
300 K cycles resistive
100 K cycles inductive
Scheduled outputs: Synchronization within 16.7 s max, reference to the Coordinated System Time
States in Fault mode per point: Hold last state, On or Off (Off is default)
States in Program mode per point: Hold last state, On or Off (Off is default)
Isolation voltage:
250V (continuous), basic insulation type, outputs-to-backplane, and output-to-output
Routine tested @ 1350V AC for 2 s
Module keying: Electronic, software configurable
Fusing: Not protected. A fused IFM can be used to protect outputs.
RTB keying: User-defined mechanical
Slot width: 1
Wire category: 11
North American temperature code: T4
Enclosure type: None (open-style)

Use this conductor category information for planning conductor routing as described in the system-level installation manual. See the Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1

Add to Cart: