Part Number: STT700-1D-A10-000000-00A0-11S-A-F1-00000Model: SmartLine ST700 Pressure Transmitters
Manufacturer: Honeywell
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months
The STT700 is an exciting new addition to the SmartLine Temperature portfolio and upgrades the widely-used STT250 temperature transmitter. The STT250 has been Honeywell??s main temperature transmitter with many decades of in-field use. The STT700 is a direct replacement for the STT250 and thus is suitable for the majority of process applications including those for control and safety while delivering excellent performance at a low installed cost.
Features:
- SmartLine platform features including SmartLine Connection Advantage when used with Experion
- Single input supporting up to 4-wire RTD sensor connection
- Dual input option supporting up to two (2) 3-wire RTD sensor connections
- Digital accuracy up to 0.15??C for RTD
- Callendar-Van Dusen sensor constants input
- HART7 communications
- DE communications
- Field housing, head mount, panel mount and DIN rail mounting options
- Transmitter and sensor diagnostics
- FM / CSA / ATEX / IEC Ex approvals
- Full compliance with SIL 2 / 3 requirement
Ordering Information
| Model | STT700 | Smart Temperature Transmitter |
| No. Inputs | 1 | Single sensor input (4 terminations) |
| Output / Protocol | D | Analog Output: 4-20mA DC
Digital Protocol: DE Protocol |
| Approvals | A1 | ATEX Intrinsically Safe & Non Sparking |
| Safety | 0 | No SIL |
| Housing | 0 | None |
| End Cap | 0 | None |
| Paint Option - Housing | 0 | Housing - standard offering |
| Paint Option - Cap | 0 | End cap - no change |
| Interface Selections | 0 | Integral Display: None
Buttons: None
Languages: None |
| Lightning Protection | 0 | No lightning protection |
| Mounting Arrangement | 0 | Bracket Type: None
Material: None |
| Customer Tag | 0 | No customer tag |
| Unassembled Conduit Plugs & Adapters | A0 | No Conduit Plugs or Adapters Required |
| Application Support | 1 | Standard Diagnostics |
| Output Limit, Failsafe & Write Protect Settings | 1 | Write Protect: Disabled
Fail Mode: High> 21.0mA dc
High & Low Output Limits(1): Honeywell Std (3.8 - 20.8 mA dc) |
| General Configuration | S | Factory Standard |
| Accuracy and Calibration | A | Accuracy: Standard
Calibrated Range: Factory Std
Calibration Qty: Single Calibration |
| Certifications and Warranty | F1
| Calibration Test Report & Certificate of Conformance
|
| Factory | 00000 | Factory Identification |
- NAMUR Output Limits 3.8 - 20.5mAdc can be configured by the customer or select custom configuration Table Vc
- Estimated Lead Time: 12 - 18
- Shipping Weight: 10 Kg
Your cart is empty
