Model | STR87G | SmartLine Pressure Transmitter with Remote Diaphragm Seals |
Number of Seals | 1 | 1 Remote Seal (High Side) |
Primary Fill Fluid (Meter body) | 1 | Silicone Oil 200 |
In-Line Gauge | A | 316 SS Bonnet |
Bolts and Nuts for Transmitter Heads | 0 | None |
Secondary Fill Fluid (capillary & seal)** | 1 | Silicone Oil 200 |
Connection of Remote Seal to Meter Body** | B | Capillary Length: 10 feet (3.0m), SS Armor |
Seal Option** | 0 | None |
Flush Flanged Seal with Lower** | AFC | Diaphragm Diameter: 3.5" Flange Size: 3" Flange Pressure Rating(1): ANSI 300
|
Wetted Material | AA | Diaphragm: 316L SS Upper Insert: 316L SS |
Non-Wetted Material (upper, upper insert) | 2 | 316L SS
|
Seal-Capillary Connection | 1 | Center Seal |
Calibration Rings | B | 316L SS |
Flushing Connection and Plugs(2) | S | Two 1/2" with metal plugs |
Approvals | A | FM Explosion proof, Intrinsically Safe, Non-incendive, & Dustproof |
Electronic Housing Material & Connection Type | E | Material: 316 Stainless Steel (Grade CF8M) Connection: 1/2 NPT Lightning Protection: None |
Output/ Protocol | H | Analog Output: 4-20mA dc Digital Protocol: HART Protocol |
Customer Interface Selections | B | Indicator: Basic Buttons: None Languages: English |
Application Software | 1 | Standard Diagnostics |
Output Limit, Failsafe & Write Protect Settings | 1 | Write Protect: Disabled Fail Mode: High> 21.0mAdc High & Low Output Limits(3): Honeywell Std (3.8 - 20.8 mAdc) |
General Configuration | S | Factory Standard |
Accuracy and Calibration | A | Accuracy: Standard Calibrated Range: Factory Std Calibration Qty: Single Calibration |
Mounting Bracket | 1 | Bracket Type: Angle Bracket Material: Carbon Steel |
Customer Tag | 1 | One Wired Stainless Steel Tag (Up to 4 lines 26 char/line) |
Unassembled Conduit Plugs & Adapters | A0 | No Conduit Plugs or Adapters Required |