| Model | STR74G | STR700 SmartLine Remote Diaphragm Seals |
| Number of Seals | 1 | 1 Remote Seal (High Side) |
| Primary Fill Fluid (Meter body) | 1 | Silicone Oil 200 |
| Construction: In-Line Gauge | A | Non-Wetted Adapter Head Materials: 316 SS Bonnet |
| Bolts and Nuts for Transmitter Heads | 0 | None |
| Secondary Fill Fluid (capillary & seal)** | 1 | Silicone Oil 200 |
| Connection of Remote Seal to Meter Body** | D | Capillary Length: 20 feet (6.1 m), SS Armor |
| Seal Option** | 0 | None |
| Flush Flanged Seal** | DDC |
|
| Wetted Material | BA | Diaphragm: 316L SS
Upper Insert: 316L SS |
| Non-Wetted Material (upper, upper insert) | 4 | Upper: 316L SS
Upper Insert: 316L SS |
| Bolts(1) | 0 | No Selection |
| Flushing Connection and Plugs(2) | 0 | 316L SS |
| Gasket | G | Grafoil® |
| Approvals | C | ATEX Explosion proof, Intrinsically Safe & Non-incendive |
| Electronic Housing Material & Connection Type | B | Material: Polyester Powder Coated Aluminum
Connection: M20
Lightning Protection: None |
| Output/ Protocol | H | Analog Output: 4-20mA dc
Digital Protocol: HART Protocol |
| Customer Interface Selections | C | Indicator: Basic
Ext Zero, Span & Config Buttons: Yes
Languages: English |
| Application Software | 1 | Standard Diagnostics |
| Output Limit, Failsafe & Write Protect Settings | 3 | Write Protect: Enabled
Fail Mode: High> 21.0mAdc
High & Low Output Limits(3): Honeywell Std (3.8 - 20.8 mAdc) |
| General Configuration | C | Custom Configuration (Unit Data Required from customer) |
| Accuracy and Calibration | B | Accuracy: Standard
Calibrated Range: Custom (Unit Data Required)
Calibration Qty: Single Calibration |
| Mounting Bracket | 7 | Bracket Type: Flat Bracket
Material: 316 SS |
| Customer Tag | 1 | One Wired Stainless Steel Tag (Up to 4 lines 26 char/line) |
| Unassembled Conduit Plugs & Adapters | A7 | M20 316 SS Certified Conduit Plug |
| Certifications & Warranty | TP
F1
FX
F5
FG | Over-Pressure Leak Test Certificate (1.5X MAWP) (F3392)
Calibration Test Report & Certificate of Conformance (F3399)
EN10204 Type 3.1 Material Traceability (FC33341)
Certificate of Origin (F0195)
NACE MR0175; MR0103; ISO15156 (FC33338) Process wetted parts only |
| Factory | 0 0 0 0 | Factory Identification |
Your cart is empty
