Part Number: STG74L-F1G000-1-C-BFB-15S-A-11A0-F1,F5-0000Model: STG74L SmartLine Gauge Pressure Transmitter
Brand: Honeywell
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months
Ordering Information
| Model | STG74L | Gauge In-Line Pressure Transmitter |
| Process Wetted Heads & Diaphragm Materials | F | Process Head Material: 316 Stainless Steel
Diaphragm Material: Hastelloy C - 276 |
| Fill Fluid | 1 | Silicone Oil 200 |
| Process Connection | G | Size/Type: 1/2" NPT (female)
Material: Same as Process Head(1) |
| Bolt/Nuts Materials | 0 | None |
| Vent/Drain Type/Location | 0 | Head Type: None
Vent Type: None
Location: None
Vent Material: None |
| Gasket Materials | 0 | None |
| Head/Connect Orientation | 1 | Standard
High Side Left, Low Side Right(2) / Std Head Orientation |
| Approvals | C | ATEX Explosion proof, Intrinsically Safe & Non-incendive |
| Electronic Housing Material & Connection Type | B | Material: Polyster Powder Coated Aluminum
Connection: M20
Lighting Protection: None |
| Output/ Protocol | F | Analog Output: none
Digital Protocol: Foundation Fieldbus |
| Customer Interface Selections | B | Indicator: Basic
Ext Zero, Span & Config Buttons: None
Languages: EN |
| Application Software | 1 | Standard Diagnostics |
| Output Limit, Failsafe & Write Protect Settings | 5 | Write Protect: Enabled
Fail Mode: N/A
High & Low Output Limits(3): N/A Fieldbus |
| General Configuration | S | Factory Standard |
| Accuracy and Calibration | A | Accuracy: Standard
Calibrated Range: Factory Std
Calibration Qty: Single Calibration |
| Mounting Bracket | 1 | Bracket Type: Angle Bracket
Material: Carbon Steel |
| Customer Tag | 0 | No customer tag |
| Unassembled Conduit Plugs & Adapters | A0 | No Conduit Plugs or Adapters Required |
| Certifications & Warranty | F1
F5 | Calibration Test Report & Certificate of Conformance (F3399)
Certificate of Origin (F0195) |
| Factory | 0000 | Factory Identification |
- STG730,740,770 supplied via 1/2" flange adapter same material as process head except carbon steel shall use 316 SS
- Left side/Right side as viewed from the customer connection perspective
- NAMUR Output Limits are configurable by customer
- Estimated Lead Time: 8 - 12
- Shipping Weight: 10 Kg
Your cart is empty
