Part Number: STG74L-E1G000-1-C-BFB-15S-A-11A0-FG,F1,F5-0000Model: STG74L SmartLine Gauge Pressure Transmitter
Brand: Honeywell
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months
Ordering Information
Model | STG74L | Gauge In-Line Pressure Transmitter |
Process Wetted Heads & Diaphragm Materials | E | Process Head Material: 316 Stainless Steel Diaphragm Material: 316L SS |
Fill Fluid | 1 | Silicone Oil 200 |
Process Connection | G | Size/Type: 1/2" NPT (female) Material: Same as Process Head(1) |
Bolt/Nuts Materials | 0 | None |
Vent/Drain Type/Location | 0 | Head Type: None Vent Type: None Location: None Vent Material: None |
Gasket Materials | 0 | None |
Head/Connect Orientation | 1 | Standard High Side Left, Low Side Right(2) / Std Head Orientation |
Approvals | C | ATEX Explosion proof, Intrinsically Safe & Non-incendive |
Electronic Housing Material & Connection Type | B | Material: Polyster Powder Coated Aluminum Connection: M20 Lighting Protection: None |
Output/ Protocol | F | Analog Output: none Digital Protocol: Foundation Fieldbus |
Customer Interface Selections | B | Indicator: Basic Ext Zero, Span & Config Buttons: None Languages: EN |
Application Software | 1 | Standard Diagnostics |
Output Limit, Failsafe & Write Protect Settings | 5 | Write Protect: Enabled Fail Mode: N/A High & Low Output Limits(3): N/A Fieldbus |
General Configuration | S | Factory Standard |
Accuracy and Calibration | A | Accuracy: Standard Calibrated Range: Factory Std Calibration Qty: Single Calibration |
Mounting Bracket | 1 | Bracket Type: Angle Bracket Material: Carbon Steel |
Customer Tag | 1 | One Wired Stainless Steel Tag (Up to 4 lines 26 char/line) |
Unassembled Conduit Plugs & Adapters | A0 | No Conduit Plugs or Adapters Required |
Certifications & Warranty | FG F1 F5 | NACE MR0175; MR0103; ISO15156 (FC33338) Process wetted parts only Calibration Test Report & Certificate of Conformance (F3399) Certificate of Origin (F0195) |
Factory | 0000 | Factory Identification |
- STG730,740,770 supplied via 1/2" flange adapter same material as process head except carbon steel shall use 316 SS
- Left side/Right side as viewed from the customer connection perspective
- NAMUR Output Limits are configurable by customer
- Estimated Lead Time: 8 - 12
- Shipping Weight: 10 Kg