Part Number: STG73L-E1G000-1-A-CHB-13S-A-31A6-F1,FE-0000Model: STG73L Gauge In-Line Pressure Transmitter
Brand: Honeywell
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months
Ordering Information
| Model | STG73L | Gauge In-Line Pressure Transmitter |
| Process Wetted Heads & Diaphragm Materials | E | Process Head Material:316 Stainless Steel
Diaphragm Material: 316L SS |
| Fill Fluid | 1 | Silicone Oil 200 |
| Process Connection | G | Size/Type: 1/2" NPT (female)
Material: Same as Process Head(1) |
| Bolt/Nuts Materials | 0 | None |
| Vent/Drain Type/Location | 0 | Head Type: None
Vent Type: None
Location: None
Vent Material: None |
| Gasket Materials | 0 | None |
| Head/Connect Orientation | 1 | Standard
High Side Left, Low Side Right(2) / Std Head Orientation |
| Approvals | A | Explosion proof, Intrinsically Safe, Non-incendive, & Dustproof |
| Electronic Housing Material & Connection Type | C | Material: Polyster Powder Coated Aluminum
Connection: 1/2 NPT
Lighting Protection: None |
| Output/ Protocol | H | Analog Output: 4-20mA dc
Digital Protocol: HART Protocol
|
| Customer Interface Selections | B | Indicator: Basic
Ext Zero, Span & Config Buttons: None
Languages: EN |
| Application Software | 1 | Standard Diagnostics |
| Output Limit, Failsafe & Write Protect Settings | 3 | Write Protect: Enabled
Fail Mode: High> 21.0mAdc
High & Low Output Limits(3): Honeywell Std (3.8 - 20.8 mAdc) |
| General Configuration | S | Factory Standard |
| Accuracy and Calibration | A | Accuracy: Standard
Calibrated Range: Factory Std
Calibration Qty: Single Calibration |
| Mounting Bracket | 3 | Bracket Type: Angle Bracket
Material: 316 SS |
| Customer Tag | 1 | One Wired Stainless Steel Tag (Up to 4 lines 26 char/line) |
| Unassembled Conduit Plugs & Adapters | A6 | 1/2 NPT 316 SS Certified Conduit Plug |
| Certifications & Warranty | F1
FE | Calibration Test Report & Certificate of Conformance (F3399)
FMEDA (SIL 2/3) Certification (FC33337) |
| Factory | 0000 | Factory Identification |
- STG730,740,770 supplied via 1/2" flange adapter same material as process head except carbon steel shall use 316 SS
- Left side/Right side as view ed from the customer connection perspective
- NAMUR Output Limits are configurable by customer
- Estimated Lead Time: 4 - 6
- Shipping Weight: 10 Kg
Your cart is empty
