Model | STF72F | Flange Mounted Liquid Level Transmitter |
Process Wetted Heads & Diaphragm Materials | 4 | Design: Pseudo Flange Ref. Head: 316 SS(1) Vent DrainValve on Ref. Head(2): 316 SS Barrier Diaphrm. (wetted): 316 SS Diaphrm. Plate (wetted): N/A Extension (wetted): N/A |
Fill Fluid (Meter Body & Flange) | 1 | Silicone Oil 200 |
Process Connection | H | Reference Head: 1/2 NPT Adapter - material matches head material and head bolt material(3) Flange: High Pressure Side |
Bolts for Process Heads | S | 316 SS Bolts |
Vent/Drain Type/Location | 1 | Ref. Head Type: Single Ended Vent Type: None Location: None Vent Material: None |
Gasket Material | A | Teflon® or PTFE (Glass Filled) |
Flange(ANSI Flanges have125-500 AARH Surface Finish) | S | 2" ANSI Class 150 without Vent/Drain Flange Material: 316L SS (wetted) Threaded Nut Ring Material: Not applicable |
Gasket Ring (wetted) | 0 | No selection |
Extension (wetted) | 0 | No selection |
Approvals | 0 | No Approval Required |
Electronic Housing Material & Connection Type | A | Material: Polyester Powder Coated Aluminum Connection: 1/2 NPT Lighting Protection: None |
Output/Protocol | H | Analog Output: 4-20mA dc Digital Protocol: HART Protocol |
Customer Interface Selections | C | Indicator: Basic Ext Zero, Span & Config Buttons: Yes Languages: English |
Application Software | 1 | Standard Diagnostics |
Output Limit, Failsafe & Write Protect Settings | 1 | Write Protect: Disabled Fail Mode: High > 21.0mAdc High & Low Output Limits(4): Honeywell Std (3.8 - 20.8 mAdc) |
General Configuration | S | Factory Standard |
Accuracy and Calibration | A | Accuracy: Standard Calibrated Range: Factory Std Calibration Qty: Single Calibration |
Mounting Bracket | 0 | None (not required with flange mount unit) |
Customer Tag | 1 | One Wired Stainless Steel Tag (Up to 4 lines 26 char/line) |
Unassembled Conduit Plugs & Adapters | A6 | 1/2 NPT 316 SS Certified Conduit Plug |
Certifications & Warranty | TP FX F1 | Over-Pressure Leak Test Certificate (1.5X MAWP) (F3392) EN10204 Type 3.1 Material Traceability (FC33341) Calibration Test Report & Certificate of Conformance (F3399) |
Factory | 0000 | Factory Identification |