Model | STD820 | Differential Pressure Transmitter |
Process Wetted Heads & Diaphragm Materials | E | Process Head Material:316 Stainless Steel Diaphragm Material: 316L Stainless Steel |
Fill Fluid | 1 | Silicone Oil 200 |
Process Connection | A | None (1/4" NPTF female thread Std) |
Bolt/Nuts Materials | C | Carbon Steel |
Vent/Drain Type/Location | 4 | Head Type: Dual Ended Vent Type: Standard Vent Location: End Vent Material: Matches Head Material(1) |
Gasket Materials | A | Teflon® or PTFE (Glass Filled) |
Static Pressure | S | Standard Static Pressure - 4500 psig (315 bar) |
Head/Connect Orientation | 1 | Standard, High Side Left, Low Side Right(2) / Std Head Orientation |
Approvals | A | FM Explosion proof, Intrinsically Safe, Non-incendive, & Dustproof |
Electronic Housing Material & Connection Type | A | Material: Polyster Powder Coated Aluminum Connection: 1/2 NPT Lighting Protection: None |
Output/Protocol | H | Analog Output: 4-20mA dc Digital Protocol: HART Protocol |
Customer Interface Selections | B | Indicator: Basic Ext Zero, Span & Config Buttons: None Languages: English |
Application Software | 1 | Diagnostics: Standard Diagnostics |
Output Limit, Failsafe & Write Protect Settings | 1 | Write Protect: Enabled Fail Mode: High> 21.0mAdc High & Low Output Limits(3) |
General Configuration | C | Custom Configuration (Unit Data Required from customer) |
Accuracy and Calibration | A | Accuracy: Standard Calibrated Range: Factory Std Calibration Qty: Single Calibration |
Mounting Bracket | 1 | Bracket Type: Angle Bracket Material: Carbon Steel |
Customer Tag | 1 | One Wired Stainless Steel Tag (Up to 4 lines 26 char/line) |
Unassembled Conduit Plugs & Adapters | A0 | No Conduit Plugs or Adapters Required |
Certifications & Warranty | F1 | Calibration Test Report & Certificate of Conformance |