| Model | STD735 | Differential Pressure Transmitter |
| Process Wetted Heads & Diaphragm Materials | E | Process Head Material: 316 Stainless Steel
Diaphragm Material: 316L Stainless Steel |
| Fill Fluid | 1 | Silicone Oil 200 |
| Process Connection | H | 1/2" NPT female
Materials to Match Head & Head Bolt Materials Selections(1) |
| Bolt/Nuts Materials | C | Carbon Steel |
| Vent/Drain Type/Location | 4 | Head Type: Dual Ended
Vent Type: Standard Vent
Location: End
Vent Material: Matches Head Material(1) |
| Gasket Materials | A | Teflon® or PTFE (Glass Filled) |
| Static Pressure | S | Standard Static Pressure - 4500 psig (315 bar) |
| Head/Connect Orientation | 1 | Standard, High Side Left, Low Side Right(2) / Std Head Orientation |
| Approvals | A | FM Explosion proof, Intrinsically Safe, Non-incendive, & Dustproof |
| Electronic Housing Material & Connection Type | A | Material: Polyester Powder Coated Aluminum
Connection: 1/2 NPT
Lighting Protection: None |
| Output/Protocol | H | Analog Output: 4-20mA dc
Digital Protocol: HART Protocol |
| Customer Interface Selections | 0 | Indicator: None
Ext Zero, Span & Config Buttons: None
Languages: None |
| Application Software | 1 | Diagnostics: Standard Diagnostics |
| Output Limit, Failsafe & Write Protect Settings | 1 | Write Protect: Enabled
Fail Mode: High> 21.0mAdc
High & Low Output Limits(3) |
| General Configuration | S | Factory Standard |
| Accuracy and Calibration | A | Accuracy: Standard
Calibrated Range: Factory Std
Calibration Qty: Single Calibration |
| Mounting Bracket | 1 | Bracket Type: Angle Bracket
Material: Carbon Steel |
| Customer Tag | 0 | No customer tag |
| Unassembled Conduit Plugs & Adapters | A0 | No Conduit Plugs or Adapters Required |
| Certifications &
Warranty | 00 | None - No additional options |
| Factory | 0000 | Factory Identification |
Your cart is empty
