Model | STD720 | Differential Pressure Transmitter |
Process Wetted Heads & Diaphragm Materials | E | Process Head Material: 316 Stainless Steel 316L Stainless Steel |
Fill Fluid | 1 | Silicone Oil 200 |
Process Connection | H | 1/2" NPT female Materials to Match Head & Head Bolt Materials Selections(1) |
Bolt/Materials | S | 316 SS |
Vent/Drain Type/Location | 4 | Head Type: Dual Ended Vent Type: Standard Vent Location: End Vent Material: Matches Head Material(1) |
Gasket Material | A | Teflon® or PTFE (Glass Filled) |
Static Pressure | S | Standard Static Pressure - 4500 psig (315 bar) |
Head/Connect Orientation | 1 | Standard, High Side Left, Low Side Right(2) / Std Head Orientation |
Approvals | A | FM Explosion proof, Intrinsically Safe, Non-incendive, & Dustproof |
Electronic Housing Material & Connection Type | C | Material: Polyster Powder Coated Aluminum Connection: 1/2 NPT Lighting Protection: Yes |
Output/Protocol | F | Analog Output: n/a Digital Protocol: Foundation Fieldbus |
Customer Interface Selections | B | Indicator: Basic Ext Zero, Span & Config Buttons: None Languages: English |
Application Software | 1 | Diagnostics: Standard Diagnostics |
Output Limit, Failsafe & Write Protect Settings | 6 | Write Protect: Disabled Fail Mode: N/A High & Low Output Limits:(1) N/A Fieldbus |
General Configuration | S | Factory Standard |
Accuracy and Calibration | A | Accuracy: Standard Calibrated Range: Factory Std Calibration Qty: Single Calibration |
Mounting Bracket | 0 | Bracket Type: None Material: None |
Customer Tag | 0 | No customer tag |
Unassembled Conduit Plugs & Adapters | A6 | 1/2 NPT 316 SS Certified Conduit Plug |
Calibration & Warranty | F1 | Calibration Test Report & Certificate of Conformance (F3399) |
Factory | 0000 | Factory Identification |