Part Number: ST5484E-121-0032-01Model: Seismic Velocity Transmitter
Brand: Metrix
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months
Ordering Information
Model | ST5484E | Seismic Velocity 4-20 mA Velocity Transmitter |
Full Scale Range(1) | 121 | 1.0 in/sec (25.4 mm/s) peak(2) |
Housing Material & Stud Size(1) | 00 | 303 SS housing, ??? NPT stud |
Hazardous Area Certification(3),(4),(5),(6) | 3 | ATEX, Ex ia IIC T4 Ga (intrinsically safe) |
Connection Type(3) | 2 | Terminal Block, 2-wire(5) ; (4-20 mA
output only) |
High-Pass Filter | 0 | 2 Hz (standard) |
Low-Pass Filter | 1 | 500 Hz |
- Smaller-diameter mounting studs are not able to withstand sustained ambient vibration levels above 2.0 in/sec. Consult Table 2
for allowable combinations of A and B options.
- The ST5484E uses an RMS amplitude detection circuit. Full scale
ranges in peak units use scaled RMS (i.e., RMS x v2). The ??derived
peak?? measurements will equal true peak only under the special
case of a pure sinusoid, not complex vibration signals.
- Hazardous Area Certifications are not compatible with all connection types. Consult Table 3 for allowable combinations of C & D
options.
- Some approvals require intrinsic safety barriers, others require
Explosion-Proof wiring practices. Refer to Table 4.
- Refer to the Accessories section of this document. Units sold with
an explosion proof or increased safety rating will include an 8200-
000 IEC or 8200-000 explosion proof elbow that will be affixed at
the factory. For increased safety with D=4, elbow is not required.
- For SIL approval, add an ??S?? prefix to the desired Hazardous Area
Certification (Option C).
- Estimated Lead Time: 4 - 6
- Shipping Weight: 1 Kg