shoping-cartYour cart is empty
    Sign In or Register



    Sign In Socially

    If you are a member of facebook or google or yahoo, you can login to our system by clicking on the icon below.



Product 138/220

 Previous 
 Return to the Product List 
 Next 
FEP311-050A1G1D4D0A1A0A1A1C1B-H1M5 New ABB Electromagnetic Flowmeter ProcessMaster

FEP311-050A1G1D4D0A1A0A1A1C1B-H1M5 New ABB Electromagnetic Flowmeter ProcessMaster

$12,501.00  $6,126.00
Save: 51% off


Part Number: FEP311-050A1G1D4D0A1A0A1A1C1B-H1M5
Model: FEP311 Electromagnetic Flowmeter ProcessMaster
Manufacturer: ABB
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months

Model and Suffix Codes

Model FEP311 Electromagnetic flowmeter ProcessMaster without explosion protection
Nominal diameter 0 5 0 DN 50 (2 in.)
Lining material A PTFE
Electrode design 1 Standard
Signal electrode material G Tantalum
Grounding accessories 1 Standard
Process connection D 4 Flange DIN PN 40
Process connection material D Stainless steel flange(1)
Certificates 0 Meter tube with PED approval
Calibration A Standard accuracy(2)
Sensor temperature range / Ambient temperature range 1 Standard sensor design / -20 ... 60 °C (-4 ... 140 °F)(3)
Name plate A Sticker
Signal cable length 0 No cable
Explosion protection A None(4)
Protection type for transmitter / sensor 1 Standard / IP67 (NEMA 4X)(5)
Cable gland A M20 x 1.5
Power supply 1 100 ... 230 V AC, 50 Hz
Signal inputs and outputs C HART + 20 mA active + pulses + contact input / output(6)
Default settings / Diagnostics 1 Parameters are at factory settings / Standard
Design Level B Sensordesign Level B(7)
Transmitter housing design H1 Single-compartment housing / Aluminium(8)
Language of documentation M5 English

  1. Material: See data sheet.
  2. Standard accuracy (0.4% of rate) assumes 2 calibration points. If more than 2 calibration points are required, you must specify 3 or 5 points under "Number of test points"
  3. Maximum fluid temperature for standard sensor design: 130 °C with PTFE, PFA, ETFE, thick PTFE, 
    90 °C (80 °C for China production site) with hard rubber, 
    60 °C with soft rubber,
    70 °C with Linatex,
    -40 °C only in conjunction with stainless steel flange.
  4. Only with model FEP311.
  5. Production site: China.
  6. Available with Ex design Zone 2 / Div 2 or Zone 1 / Div1.
  7. To be coded in case of FM approval only.
  8. Not available with Ex design Zone 1


  • Estimated Lead Time: 8
  • Shipping Weight: 15 Kg

Add to Cart:

  • Model: FEP311-050A1G1D4D0A1A0A1A1C1B-H1M5
  • 7 Units in Stock


Processing Time
  • Ships in 24 hours: Processing Time is guaranteed to be shorter than 24 hours.
  • Typical Processing Time: 3 - 12 days

We ship to over 200 countries worldwide!