Product Number: EJA530A-EBS7N-07DN/E1/M15/T06Model: Gauge Pressure Transmitter
Manufacturer: Yokogawa
Ordering Information
- Model: EJA530A - Gauge Pressure Transmitter
- Output Signal: E - 4 to 20 mA DC with digital communication (HART protocol, refer to GS 01C22T01-00E)
- Measurement span (capsule): B - 0.1 to 2 MPa {1 to 20 kgf/cm2} {14.5 to 290 psi} {1 to 20 bar}
- Wetted Parts Material1: *S - [Process Connection] SUS316L2; [Diaphragm] Hastelloy C-2763
- Process Connection: 7 - 1/2 NPT male
- N: Always N
- -0: Always 0
- Electrical Connection: 7 - 1/2 NPT female, two electrical connections and a blind plug
- Integral Indicator: D - Digital indicator
- Mounting Bracket: #N - (None)
- Stainless steel amplifier housing4: /E1 - Amplifier housing material; SCS14A stainless steel (equivalent to SUS316 cast stainless steel or ASTM CF-8M)
- Mill Certificate: /M15 - Process connector
- Pressure test/Leak test Certificate5: /T06 -
Test Pressure: 2 MPa (20 kgf/cm2)6
Nitrogen (N2) Gas or Water7: Retention time: 10 minutes
- The "*" marks indicate the construction materials conform to NACE material recommendations per MR01-75. For the use of SUS316 material, there may be certain limitations for pressure and temperature. Please refer to NACE standards for details.
- The "#" marks indicate the most typical selection for each specification.
Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user's process fluids.
Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150?C [302?F] or above). Contact Yokogawa for detailed information of the wetted parts material.
SUS316L or ASTM grade 316L.
Hastelloy C-276 or ASTM N10276.
- Applicable for Electrical connection code 2, 3, 4, A, C and D. Not applicable for Option code P and X1.
- The unit on the certificate is always kPa or MPa regardless of selection of option code D1, D3, or D4.
- Applicable for Capsule code B.
- Pure nitrogen gas or pure water is used for oil-prohibited use (Option code K1 and K2)
- Estimated Lead Time: 4 - 6
- Shipping Weight: 5 Kg
Your cart is empty
