Your cart is empty

$9,217.00 $4,516.00
Save: 51% off

$10,061.00 $4,930.00
Save: 51% off

$9,411.00 $4,612.00
Save: 51% off

Home :: Rosemount Transmitter :: EJA210E-JHS4G-912DN-WA13C1SW00-B/D4 New Yokogawa EJA210E Flange Mounted Differential Pressure Transmitter

Product 760/1465

EJA210E-JHS4G-912DN-WA13C1SW00-B/D4 New Yokogawa EJA210E Flange Mounted Differential Pressure Transmitter

$2,091.00 $1,025.00
Save: 51% off

Part Number: EJA210E-JHS4G-912DN-WA13C1SW00-B/D4

Ordering Information

Model: EJA210E - Flange mounted differential pressure transmitter
Output Signal: -J - 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)?
Measurement span (capsule): H - 5 to 500kPa (20 to 2000 inH2O)
Low pressure side wetted parts material: S -
Cover flange and process connector: ASTM CF-8M?
Capsule: Hastelloy C-276? (Diaphragm) F316L SST, 316L SST (Others)
Capsule gasket: Teflon-coated 316L SST
Drain/Vent plug: 316 SST
Low pressure side Process connections: 4 - with 1/2 NPT female process connector
Coverflange bolts and nuts material: G - 316L SST
Installation: -9 - Horizontal piping type and left side high pressure
Amplifier housing: 1 - Cast aluminium alloy
Electrical connection: 2 - 1/2 NPT female, two electrical connections without blind plugs
Integral Indicator: D - Digital indicator⁴
N - always N
Process connection style: W - Flush type
Flange rating: A1 - ANSI class 150
Flange size: 3 - 3-inch (80mm)
Flange material: C - JIS S25C⁵
Gasket contact surface⁶: 1 - Serration (for ANSI flange with wetted parts material SW only)
Wetted parts material (high pressure side)⁷: SW - [Diaphragm] 316L SST; [Others] 316 SST
Flushing connection ring⁸: 0 - None
Extension: 0 - None
Fill fluid: -B - For general use (Silicone oil)
Pressure temperature: 40 to 120?C
Ambient temperature: 40 to 85?C
Calibration unit⁹: /D3 - M calibration (kgf/cm? unit)

NOTE:

HART 5 or HART 7 is selectable.
Cast version of 316 SST. Equivalent to SCS14A.
Hastelloy C-276 or ASTM N10276.
Not applicable for output signal code G.
Forged version of the material may be used.
See Table 3 ?asket contact surface?n Page 5.
Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user? process fluids.
Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150?C [302?F] or above). Contact Yokogawa for detailed information of the wetted parts material.
When specified flushing connection ring code A or B, exclusive gasket is provided for transmitter side.
In case of wetted parts material code TW (Tantalum), the process temperature limit is ? to 200?C.

Add to Cart: