shoping-cartYour cart is empty
    Sign In or Register



    Sign In Socially

    If you are a member of facebook or google or yahoo, you can login to our system by clicking on the icon below.



Product 126/219

 Previous 
 Return to the Product List 
 Next 
DY050-FBLBA1-4N/KS28 New Yokogawa DY Vortex Flowmeter

DY050-FBLBA1-4N/KS28 New Yokogawa DY Vortex Flowmeter

$9,627.00  $4,717.00
Save: 51% off


Part Number: DY050-FBLBA1-4N/KS28

Model and Suffix Codes
  • Model: DY050 - Size 50 mm (2 inch)
  • Output signal/communication(1,2): -F - Digital communication (Foundation Fieldbus protocol)
  • Body material(3,4): B - Stainless steel (CF8M / equiv. 1.4408)
  • Shedder bar material(4,5): L - Duplex Stainless Steel
  • Process connection(6,7): BA1 - ANSI Class 150 Flange (RF)
  • Electrical connection(8): -4 - ISO M20 x 1.5 Female
  • Indicator(9): N - None Indicator, Remote type detector
  • Options:
    /KS28

  1. Nominal size, Fluid (Liquid, Gas, Steam), Density, Viscosity, Pressure, Temperature, Flow range, Parameters are set at the factory before shipment.
  2. For FOUNDATION Fieldbus protocol, refer to GS 01F06F01-01E. For Fieldbus communication type, there are no setting keys on the display board.
  3. Refer to table 1. In case of /NC or /HY or /HT, select X (others).
  4. Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the instrument itself can be damaged and that fragments from the instrument can contaminate the user s process fluids. Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150 ?C [302 ?F] or above). Contact Yokogawa for detailed information of the wetted parts material.
  5. Refer to table 1. In case of /NC or /HY or /HT, select X (others).
  6. Refer to Table 2.
  7. For process connection BD: Flanges with hole pattern, flange diameter, flange facing according EN 1092-1 can be used. Standard surface Ra 3.2 - 6.3. For process connection BA: Flanges with hole pattern, flange diameter, flange facing according ASME B16.5 can be used.
  8. In case of an explosion protect type, it depends for an electrical connection on the kind of an explosion protect type.
  9. Indicator is not available for remote type detector.

  • Estimated Lead Time: 10 - 12
  • Shipping Weight: 10 Kg

Add to Cart:

  • Model: DY050-FBLBA1-4N/KS28
  • 7 Units in Stock


Processing Time
  • Ships in 24 hours: Processing Time is guaranteed to be shorter than 24 hours.
  • Typical Processing Time: 3 - 12 days

We ship to over 200 countries worldwide!