1794-OB16D New Allen Bradley FLEX Digital DC Output Module

$271.00 $161.00
Save: 41% off

Part Number : 1794-OB16D

Model: FLEX Digital DC Output Module

Manufacturer: Allen Bradley

Model		1794-OB16D
Number of outputs		16, nonisolated
Recommended terminal base unit		1794-TB2, 1794-TB3, 1794-TB3S
On-state voltage, output min		10V DC
On-state voltage, output nom		24V DC
On-state voltage, output max		31.2V DC
Output current rating		8.0 A (16 outputs @ 0.5 A)
On-state current, output, min		1.0 mA per channel
On-state current, output, max		500 mA per channel
On-state voltage drop, max		0.5V DC
Surge current		2 A for 50 ms, repeatable every; 2 seconds
Off-state leakage current, max		0.5 mA
Isolation voltage		50V (continuous), Basic Insulation Type Tested at 850V DC for 1 s between user and system No isolation between individual channels
Output signal delay1 Off to On On to Off		0.5 ms 0.5 ms
FlexBus current		60 mA @ 5V DC
Power dissipation, max		4.8 W @ 31.2V DC
Thermal dissipation, max		16.4 BTU/hr @ 31.2V DC
Short circuit protect and detection		Thermal shutdown (auto reset) Detection condition: when. external power active, output signal active, and output port voltage less than 2V.
Open wire detect off-state leakage current		0.1 mA When external power active and output signal inactive.
Detect reverse polarity voltage		Minimum 10V: Module must detect if the reverse polarity external power supply voltage is greater than the value.

Delay time is the time from the receipt of an output on or off command to the output actually turning on or off.

Add to Cart: