Your cart is empty

$1,190.00

$349.00

$269.00

Home :: PLC & DCS :: 1794-AENTR New Allen Bradley FLEX I/O Dual Port Ethernet/IP Adapter

Product 628/5332

1794-AENTR New Allen Bradley FLEX I/O Dual Port Ethernet/IP Adapter

$1,800.00 $998.00
Save: 45% off

Part Number: 1794-AENTR

Model: FLEX I/O Dual Port Ethernet/IP Adapter

Manufacturer: Allen Bradley

Condition: New & Original in Factory Packing

Factory Warranty: 12 Months

Technical Specifications

I/O capacity: 8 modules
Communication rate: 10/100 Mbps
Indicators:
Module status red/green
Network status red/green
Link 1 status yellow/green
Link 2 status yellow/green
Power supply:
To comply with the CE Low Voltage Directive (LVD), this equipment must be powered from a source compliant with the following:
Safety Extra Low Voltage (SELV) or Protected Extra Low Voltage (PELV).
Input voltage range:
19.2 31.2V DC (includes 5% AC ripple)
Input voltage, nom: 24V DC
Inrush current: 18 A for 2 ms
FlexBus output current, max: 640 mA
Isolation voltage:
50V continuous, Basic Insulation
Type Tested @ 1000V AC for 60 s, power to FlexBus to EtherNet
Power consumption, max:
500 mA
400 mA @ 24V DC
Power dissipation, max: 7.1 W @ 19.2V DC
Thermal dissipation: 24.2 BTU/hr @ 24V DC
Wire size, power conductors: 0.33 3.31 mm? (22 12 AWG) stranded copper wire rated @ 75 ?C (167 ?F) or greater, 1.2 mm (3/64 in.) insulation, max
Wire category?:
1 - on power ports
2 - on communications ports
Ethernet connector: 2 Ethernet RJ45 Category 5
North American temperature code: T5
IEC Temp code: T5
Terminal screw torque: 0.8 Nm (7 lb-in.)
Dimensions, approx. (HxWxD): 87 x 94 x 92 mm (3.4 x 3.7 x 3.6 in.)

Use this conductor category information for planning conductor routing as described in the system-level installation manual.

Add to Cart: